Niagara Cutter N50366 Cobalt Steel Square Nose End Mill, Inch, Weldon Shank, Uncoated (Bright) Finish, Finishing Cut, 35 Degree Helix, 2 Flutes, 4.125" Overall Length, 1.125" Cutting Diameter, 1.000" Shank Diameter
Get Special Price Niagara Cutter N50366 Cobalt Steel Square Nose End Mill, Inch, Weldon Shank, Uncoated (Bright) Finish, Finishing Cut, 35 Degree Helix, 2 Flutes, 4.125 Overall Length, 1.125 Cutting Diameter, 1.000 Shank Diameter Reviews
So you can check out the other reviews at Amazon.com
only with $ 87.43
| Material | High Speed Steel |
| Cutting Length | 1-5/8 Inches |
| Finish Type | Uncoated (Bright) |
| Cutting Diameter | 1-1/8 Inches |
| Number of Flutes | 2 |
- 2 Flute design makes these ideal for plunge cutting when chip removal is not a problem
- General purpose end mill for working on all types of materials
- Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys
- Uncoated end mills feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- Center Cutting End Mills are designed with "End Teeth" making these ideal for applications such as profiling, pocket and slotting
Product Description
The Niagara Cutter SP205 uncoated (bright) cobalt steel square nose end mill has two flutes and a 30-degree helix angle to mill a wide range of materials, including high-temperature alloys. The cobalt steel substrate can be run at faster speeds and stays sharp longer than high-speed steel tools, while offering greater resistance to heat and abrasion. With no coating or surface treatment, this uncoated tool can be used on a broad range of materials.
The end mill’s two flutes have better chip-carrying capacity than end mills with more flutes while offering additional support when the tool goes deep into the material in applications with a high depth of cut. The 30-degree helix angle offers general-purpose machining. It balances lower angles’ strong cutting edge for difficult-to-machine materials with higher angles’ increased cutting action. The tool’s square end creates sharp, unrounded cuts, while the center-cutting design has cutting teeth at the end of the tool that support making pocket cuts, profiling, and slotting. Cutting diameter tolerance is +0.001” to -0.000”. The end mill has a Weldon shank.
End mills are designed to remove material and create multi-dimensional shapes and profiles. They have cutting edges along the outside diameter and flutes that remove chips from the cutting area and allow cooling fluids to enter. If heat is not reduced effectively, the tool’s cutting edges will dull and additional material buildup can occur. The number of flutes can range from two to eight. Two-flute designs offer the most efficient chip removal, but more flutes provide a smoother finish. The shank is the end of the tool held in place by a tool holder or machine. Center-cutting end mills can create three-dimensional shapes and profiles, and make plunge cuts similar to a drill bit. Non-center-cutting end mills are for applications such as peripheral milling and finishing, but cannot make plunge cuts.
Niagara Cutter has been designing and manufacturing precision cutting tools since 1954. Specializing in end mills, cutting mills, and saws, the company is based in New York and manufactures its tools at facilities in Pennsylvania and Massachusetts. This allows the company control over production, from substrate to coating, which is essential for customers in a variety of industries, especially aerospace and automotive.
Product Specifications
Specification for this product family
Receive The Special Price Here :
----------------------------
Hey my bro, Many thanks for visiting our Website. Are you currently trying to find facts about Niagara Cutter N50366 Cobalt Steel Square Nose End Mill, Inch, Weldon Shank, Uncoated (Bright) Finish, Finishing Cut, 35 Degree Helix, 2 Flutes, 4.125 Overall Length, 1.125 Cutting Diameter, 1.000 Shank DiameterThe Good News, Right now we're giving big as much as 85% for people who buy Niagara Cutter N50366 Cobalt Steel Square Nose End Mill, Inch, Weldon Shank, Uncoated (Bright) Finish, Finishing Cut, 35 Degree Helix, 2 Flutes, 4.125 Overall Length, 1.125 Cutting Diameter, 1.000 Shank Diameter products through this Website.Not just that, you'll even get yourself a absolutely free discount in the event that you order today.Thanks for watching and please give a thumbs up.
----------------------------Disclaimer:
This Website is participant in the amazon services llc associate program.I do use affiliate links when linking products in the Website description.This does not affect your buying experience or item price but does mean I receive a small commission on items purchased using such links.An affiliate advertising program designed to provide a means for sites to earn advertising fees by linking to website and amazon.comWe also participates in affiliate programs with other sites. We are compensated for referring traffic and business to other companies.
---------------------------
0 Response to "Niagara Cutter N50366 Cobalt Steel Square Nose End Mill, Inch, Weldon Shank, Uncoated (Bright) Finish, Finishing Cut, 35 Degree Helix, 2 Flutes, 4.125" Overall Length, 1.125" Cutting Diameter, 1.000" Shank Diameter"
Post a Comment